Morningstar SunSaver Duo SSD-25RM PWM Charge Controller

Morningstar, SunSaver Duo, PWM Charge Controller, 25A, 12VDC, #6 AWG, Remote Meter, SSD-25RM

Morningstar’s SunSaver Duo SSD-25RM is an advanced PWM two battery charge controller for RV’s, caravans, boats and cottages. This product will charge two separate and isolated batteries at the same time, such as a “house” and an engine battery, based on user selectable priorities.

The SunSaver Duo employs Morningstar’s legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well-recognized in the solar industry. This controller also includes a backlit remote meter which may be mounted in or on a wall, and displays digital and pictorial status information about the solar power system.

The SunSaver Duo is epoxy encapsulated for environmental protection, is user adjustable via DIP switch or connection to a personal computer, and has an optional remote temperature sensor.

Features

• Two Battery Charging & Longer Battery Life - Solar charge current is shared between the two batteries based on a user selectable priority. When one battery is fully charged, all of the charge current flows to the other battery. Four stage series PWM pulse charging and temperature compensation increases the useful life of the batteries.

• Easy to Install & Lower Cost - The controller is installed near the batteries using the clearly labeled large wire terminals. The remote meter may be mounted in the wall or on the wall using the included frame. Also includes the meter wiring with RJ-11 connector. Two battery charging eliminates the added cost of two separate solar charging systems and the need for isolation between the batteries.

• Highly Reliable & Extensive Electronic Protections - Epoxy encapsulation protects the controller against dust and high humidity. Efficient electronics and a conservative thermal design allow the controller to operate reliably at high temperatures. Five year warranty and estimated fifteen year life span. The controller will not be damaged from wiring mistakes during installation. There are no fuses to replace, and the controller will automatically re-set after a wiring mistake.