Loading... Please wait...| Enphase 235W-440W+ Microinverter - IQ7PLUS-72-2-US |
|
Enphase, IQ 7+ Micro Inverter, compatible with 60, 72 and 96-cell PV, modules, 208/240 volt, 295VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7PLUS-72-2-US The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro achieve the highest system efficiency. Part of the Enphase IQ System, the IQ 7 and IQ 7+ Micro integrate seamlessly with the Enphase Envoy-S, and the Enphase Enlighten monitoring The IQ 7 and IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty. |
|
Features
|
| General Information | |
| Manufacturer: | Enphase Energy |
| Product Line: |
IQ7 Series |
| Model ID: |
IQ7PLUS-72-2-US |
| Certifications and Safety Ratings: |
| Mechanical Data |
|
| Technology: | Micro-Inverter |
| Dimensions: |
8.34 x 6.89 x 1.19 Inches |
| Weight: | 2.38 lbs |
| Connector Type: | MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter) |
| Cooling: | Natural convection - No Fans |
| Approved for Wet Locations: | Yes |
| Pollution Degree: | PD3 |
| Enclosure: | Class II Double-Insulated |
| Environmental Category / UV Exposure Rating: | Outdoor - IP67 |
| Communication: | Power Line Communication (PLC) |
| Monitoring: | Enlighten Manager and MyEnlighten Monitoring Options. Compatible with Enphase IQ Envoy |
| Compliance (Pending): | AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62019-1, IEC/EN 62109-2 |
| Ambient Temperature Range: | -40°C to +65°C |
| Relative Humidity Range: | 4% to 100% (Condensing) |
| Electrical Data |
|
| Input Data | |
| Commonly Used Module Pairings: | 235W to 440W+ |
| Module Compatibility: | 60-Cell and 72-Cell PV Modules |
| Maximum Input DC Voltage: | 60 Volts |
| Peak Power Tracking Voltage: | 27V-45 Volts |
| Operating Range: | 16V-60 Volts |
| Min / Max Start Voltage: | 22 V / 60 Volts |
| Max DC Short Circuit Current (Module Isc): | 15 Amps |
| Overvoltage Class DC Port: | II |
| DC Port Backfeed Under Single Fault: | 0 Amps |
| PV Array Configuration: | AC Side Protection Requires Max 20A per Branch Circuit |
| Output Data (AC) | |
| Peak Output Power: | 295 VA |
| Maximum Continuous Output Power: | 290 VA |
| Nominal Voltage / Range: | 230V / 184-276V |
| Nominal Output Current: | 1.26 Amps |
| Nominal Frequency: | 50 Hz |
| Extended Frequency Range: | 45-55 Hz |
| Maximum Units per 20 A (L-N) Branch Circuit: | 13 (230 VAC) |
| Overvoltage Class AC Port: | III |
| AC Port Backfeed Current: | 0 Amps |
| Power Factor Setting: | 1.0 |
| Power Factor (Adjustable): | 0.7 Leading ... 0.7 Lagging |
| Efficiency: | 96.5% |
| Datasheets |
|
| Document | Type |
| Specifications | |
| Installation Guide |
|
| Warranty | 25 Year Limited Warranty |
| Warranty |
| Terms & Conditions |
|
| Shipping: | Shipping Policy |
| Returns: | Returns Policy |
| Payments: | We accept: Visa, MasterCard, Discover, and American Express. We also accept checks, direct deposit and wire transfers for large orders. |
Warranty: 25 Year Limited Warranty