ABB AC-TRUNK-UNLOCK-TOOL

ABB, Accessory, Unlock and Disconnect Tool for MICRO-0.25/0.3 AC Trunk Cable, Qty. 1, AC-TRUNK-UNLOCK-TOOL

The AC-TRUNK UNLOCK TOOL must be used for the disconnection of the AC connector from the MICRO inverter or for the removal of the AC-TRUNK PLUG CAP from the connectors on the AC-TRUNK cable.

The tool is used to release the two retaining clips on the connectors installed on the AC-TRUNK cables.

Features

• Robust & Flexible - Designed to withstand even very intense operating conditions, they guarantee maximum mechanical, chemical and UV resistance. Once connected to the micro-inverters or terminated using the specific water-tight caps, AC-TRUNK cable connectors guarantee IP68 environmental protection grade.
  

• Flexible - It is possible to select up to three models of AC-TRUNK cable, with different distances between one connector and the next, depending on the module type and their method of installation (horizontal or vertical). Thanks to the broad temperature range (-40°C...+90°C) in fixed installations) and the high mechanical strength, there are no particular restrictions on the type of installation, thus guaranteeing high installation flexibility.
  

• Simple - Power-One microinverters are connected directly to AC-TRUNK cable connectors without using special tools. The AC accessories complete the range, making it possible to create extension cables, terminations and connections to other cables, simplifying the installation of small and large systems alike.