JLM Energy Fully Assembled Back Up System - Energizr - E100 |
JLM Energy, E100, Energizr 100, fully-assembled backup system, AC coupled (5.355 kW max AC input from PV inverter), 4.4 kW off-grid battery inverter, 7.8 kWh LiFePO4 battery with BMS, UL certified, indoor enclosure, 20-Year warranty, lifetime Measurz software/app account. Max off-grid continuous current: 18.3A. Use with 30 amp critical load panel and PV inverter (string or micro), E100 Energizr 100 seamlessly brings together different sources of energy to power loads and manage a battery system. Energizer 100 creates a local microgrid so that grid-tied renewable energy inverters continue to generate electricity even during a black-out. In situations where the grid is available, the renewable resources are used to charge the system batteries, and then the excess renewable energy is used for net metering. When the grid is unavailable for if the load’s demand surpasses a pre-specified level, Energizr 100 uses the energy stored in the batteries to power local electrical loads and, that the PV or wind power generated is used to recharge the batteries. If the grid is unavailable and the batteries are fully charged, the renewables are controlled to prevent the batteries from overcharging. |
Features
|
General Information | |
Manufacturer: | JLM Energy |
Product Line: |
Energizr |
Model ID: |
E100 |
Certifications and Safety Ratings: | |
Mechanical Data |
|
Technology: | Assembled Back Up System |
Dimensions: |
93.75 x 16.00 x 9.00 inches |
Weight: | 419.00 lbs |
Certifications (UL): | Certified to UL 1741, 2nd Edition |
Certifications (CSA): | Certified to CSA STD c22.2 No. 107.1-01 |
Maximum Torque for Battery Terminal: | 30ft - lbs (40.6 Nm) |
Temperature Compensation (External): | 0°C to 50°C |
Battery Chemistry Compatibility: | LiFePO4, AGM, FLA, and Gel |
Option 1: Chemistry AGM: | Nominal Capacity: 4.3kWh |
Option 2: Chemistry LiFePO4: | Nominal Capacity: 8.8kWh |
Electrical Data |
|
Grid & Generator Input (AC) / Loads Output On-Grid (AC) | |
Continuous AC Output Power (25°C): | 7200 VA |
Input Voltage Range: | 120/240V Split-Phase (60V-140V per Leg) |
Input Frequency Range: | 50 Hz to 70 Hz |
Surge Amps (Overcurrent / Fault Limit): | L-L: 70 AAC (1 mSec), 40 AAC (100 mSec) |
Maximum Continuous Current: | 30 AAC |
Maximum Overcurrent Protection: | 30 AAC |
Loads Output Off-Grid (AC) | |
Continuous AC Output Power (25°C): | 4400 VA |
Voltage Range: | 120/240V (+/-5%) Split-Phase |
Frequency Range: | 60 Hz (+/-0.1 Hz) |
Surge Amps (Overcurrent / Fault Limit): | L-L: 70 AAC (1 mSec), 40 AAC (100 mSec) |
Surge Power: | 8500 Real Watts (5 Seconds) |
AC Voltage Distortion at Rated Power: | Less than 5% THD |
Renewables Input On-Grid and Off-Grid (AC) | |
Continuous AC Output Power (25°C): | 7200 VA |
Input Voltage Range: | 120/240V Split-Phase (60V-140V per Leg) |
Input Frequency Range: | 50 Hz to 70 Hz |
Surge Amps (Overcurrent / Fault Limit): | L-L: 70 AAC (1 mSec), 40 AAC (100 mSec) |
Maximum Continuous Current: | 30 AAC |
Maximum Overcurrent Protection: | 30 AAC |
Battery Port | |
Input Voltage Range: | 36V - 67.6V (48V Nominal) |
Maximum Continuous Current: | 100 ADC (Analog-to-Digital Converter) |
Surge Amps (Overcurrent / Fault Limit): | 140 ADC (1 mSec) |
Maximum Torque for Battery Terminal: | 30ft - lbs (40.6 Nm) |
Temperature Compensation (External): | 0°C to 50°C |
Battery Chemistry Compatibility: | LiFePO4, AGM, FLA, an Gel |
Option 1: Chemistry AGM: | Nominal Capacity: 4.3 kWh |
Option 2: Chemistry LiFePO4: | Nominal Capacity: 8.8 kWh |
Datasheets |
|
Document | Type |
JLM Energy Energizr E100 Specs | Specifications |
JLM Energy Battery Specifications | Installation Guide |
Warranty | Contact Manufacturer For Details |
Terms & Conditions |
|
Shipping: | Shipping Policy |
Returns: | Returns Policy |
Payments: | We accept: Visa, MasterCard, Discover, and American Express. We also accept checks, direct deposit and wire transfers for large orders. |
Warranty: Contact Manufacturer For Details